Indonesian energy distribution company, energy monitoring and control system at more than 500 stations is made through the RTU300 series remote terminal unit.
- Reading the data of cells in transformer substations via RTU340 (IEC 61850 MMS Client)
- Instant data transfer to tracking system over IEC 60870-5-104 protocol
- Monitoring the energy analyzers
- Monitoring rectifier alarms and fire alarms in substations
- Cutter position tracking
- Tracking of generators
- Tracking of UPS
Other Post
All Posts
Indonesia PLN Power Distribution System
Indonesian energy distribution company, energy monitoring and control system at more than 500 stations is made through the RTU300 series remote terminal unit.
Reading the data of cells in transfo
What is the MQTT?
What is the MQTT Communication Protocol?
The rapid proliferation of Internet of Things (IoT) and other similar distributed systems has increased the importance of data communication. The requirements
Republic of Türkiye Ministry of Environment, Urbanization and Climate Change Continuous Wastewater Tracking System
Mikrodev products were preferred at more than 100 stations in the Continuous Wastewater Monitoring System managed by the Republic of Türkiye Ministry of Environment, Urbanization and Climate Change.
Republic of Türkiye General Directorate of State Hydraulic Works Flow Observation Station
Mikrodev PLC products were preferred in more than 30 stations in the Flow Observation Station project of the General Directorate of State Hydraulic Works.
- MP211EGL PLC products were used in the f
Redundancy Design: Seamless Operation with Dual SCADA Servers, Dual RTUs, and Dual SIM
An outage can start as ordinarily as a single relay falling silent in the field. Then alarms rain down, data flow stops, and decision-making is delayed. In sectors like energy, water, wastewater, oil
RTU or PLC? A Guide to Making the Right Choice in Water and Energy Projects
When you go out to the field, the picture is usually the same: distributed stations, pumping stations, reservoirs, substation yards, and at every point the same question arises: “What should we use to
What is IEC 60870-5-104 and why is it used in power system automation?
IEC 60870-5-104 is a communication standard used for remote monitoring and control in electrical power systems. Since it is designed for telecontrol and telemetry, it is very common in substations, es
Integration of Power Quality Data into SCADA: An IEC 61000-4-30-Focused Approach
If power quality is not visible, it cannot be managed. With SCADA integration, it is now possible to view Power Quality (PQ) data on a single screen, take rapid action during a fault, clarify maintena
What Is RTU Device?
What Is RTU Device?
RTUs (Remote Terminal Units) are important components used in industrial automation systems. These devices communicate with field devices (sensors, actuators, switches, etc.) and
What is SCADA, Who Uses It and How It Works
What is SCADA, Who Uses It and How It Works
What is SCADA?
SCADA refers to a system that collects data from various sensors at a factory, plant, or in other remote locations and then sends this da
