Mikrodev IoT protocol converter product family was preferred in the IMES Organized Industrial Zone Automatic Meter Reading System Project. In the current system, data of more than 600 electricity meters are read through the SC100 Series IoT Gateway product family. Data transfer to remote systems is carried out via the integrated GSM modem.
- Over 250 stations
- Over 250 SC100 series Serial Device Server
- Up to 600 electric meters
- Invoicing system fully compatible with changing legislation
- Billing designs in accordance with energy regulations
- Energy data tracking and analysis portals
- Prospective energy consumption estimation tools
- Daily, monthly, annual reporting on a station bases
Other Post
All Posts
Turkish Armed Forces Base Areas Water Distribution System
MP211 Series PLC and ViewPLUS SCADA software were used to control the water distribution system of military base areas in Hakkari, Türkiye. Tank water level and pump status information, failure tracki
What are the advantages of meter reading with MDC OSOS Server?
MDC OSOS Server: An Innovative Solution for Modern Electricity Meter Data Management
Introduction
The automated collection and management of electricity consumption data is a critical need in modern
Industrial Scalability in MQTT with Sparkplug B: The Right Topology and Automatic Discovery
The number of devices in the IIoT field is increasing rapidly. The free structure of MQTT is flexible, but in large facilities, this freedom can turn into disorder. This is where MQTT Sparkplug B come
Motion Control with PLC & the Real Applications via Microdev PLC Devices
Programmable Logic Controllers (PLCs) are widely used in the industrial automation industry to control and monitor various processes. One of the main functions of PLCs is motion control, which involve
Kayseray Energy Monitoring and Control SCADA System
Energy monitoring and control, catenary line monitoring and control and switch position information of more than 20 substations within Kayseray, a light rail public transportation system that started
Importance of Calendar and Timing Functions and PLC Programming
Industrial automation is the cornerstone of process control in modern manufacturing facilities. PLC (Programmable Logic Controller) systems are used to manage automation control, which is the foundati
What is SCADA, Who Uses It and How It Works
What is SCADA, Who Uses It and How It Works
What is SCADA?
SCADA refers to a system that collects data from various sensors at a factory, plant, or in other remote locations and then sends this da
Bursa Inegol OIZ 34.5 KV Medium Voltage Power Distribution Network SCADA System
Mikrodev products were used in energy monitoring and controls throughout the Inegol Organized Industrial Zone in Bursa, Türkiye. Cutter position information, controls and fault tracking are done throu
IEC 61131-3 Programming and Its Relation to the PLC Devices
IEC 61131-3 Programming and Its Relation to the PLC Devices
IEC 61131-3 Programming is a coding language used for programming standards for PLC devices. In this programming, there are function blocks
Modbus Protocol and All Its Features
What is MODBUS Protocol and Its Features?
Modbus protocol is a serial communication protocol used to communicate between devices in industrial automation systems. Below you can find information about
