Mikrodev products were preferred in the Marmara Highway Energy Monitoring SCADA System located in Türkiye. More than 200 stations located along the highway were integrated into the SCADA system.
- More than 200 stations
- Data transfer to SCADA system via MODBUS protocol
- Energy and power value calculations
- Operation, fault status information tracking
- Energy equipment position location information
- Automatic or manual system control
Other Post
All Posts
IEC 61850, IEC 60870, and DNP3: Strategic Protocol Selection and Architecture in Substation SCADA Projects
As modern energy grids evolve from one-way power flow to two-way, dynamic, and smart grid structures, the backbone of this transformation is formed by communication protocols. In a Substation Automati
National Bank of Saudi Arabia ATM Control Automation
Mikrodev MP211 series PLC products were used in the ATM Control Automation project of the National Bank of Saudi Arabia. At more than 80 stations, the operating status of the ATM cabinet, cabin securi
RTU or PLC? A Guide to Making the Right Choice in Water and Energy Projects
When you go out to the field, the picture is usually the same: distributed stations, pumping stations, reservoirs, substation yards, and at every point the same question arises: “What should we use to
İstanbul Metropolitan Municipality Smart City SCADA System
Smart city system control is carried out within the body of İstanbul Metropolitan Municipality Energy Management and Lighting Directorate. Energy monitoring and efficiency calculations, as well as el
Republic of Türkiye Ministry of Environment, Urbanization and Climate Change Continuous Wastewater Tracking System
Mikrodev products were preferred at more than 100 stations in the Continuous Wastewater Monitoring System managed by the Republic of Türkiye Ministry of Environment, Urbanization and Climate Change.
RTU vs. PLC: Fundamental Comparison in Terms of Differences, Usage Areas, and Control Systems
Success in the field of automation begins with choosing the right control system. RTU (Remote Terminal Unit) and PLC (Programmable Logic Controller) are two fundamental devices used to safely manage c
Trabzon City Water and Sewerage Administration (TİSKİ) Water SCADA System
RTU and PLC products installed in more than 200 wells, warehouses and pumping centers throughout Trabzon are managed through the ViewPlus SCADA software in the TİSKİ Control Center.
Over 200 well
IEC 61131-3 Programming and Its Relation to the PLC Devices
IEC 61131-3 Programming and Its Relation to the PLC Devices
IEC 61131-3 Programming is a coding language used for programming standards for PLC devices. In this programming, there are function blocks
What Is a Remote Terminal Unit (RTU)? Its Fundamental Role in Field Automation
Imagine a water reservoir located outside the city. The water level inside drops rapidly at midnight, the pump needs to start, but there is no one on site. If it takes hours for a technician to arrive
What is a Distributed Control System (DCS)?
Distributed Control System (DCS) is an automation system and is used to control a manufacturing facility or an industrial process. These systems work in connection with each other by communicating man
