Mikrodev products were used at over 200 stations in the Israel Cellcom Telecommunication Base Stations Monitoring System. In the system, energy monitoring of base stations is carried out, and station security is ensured with sensors. The alarms that occur are monitored over the system and notifications are made via SMS.
- Over 200 MP211 series PLC’s
- Alarm control
- Base station security
- Sensor status informations (Temp, motion sensor, lightning etc.)
- Energy tracking
- SMS notifications in case of alarm
Other Post
All Posts
What Is Modbus?
What Is Modbus and What Is It Used For?
Modbus is a communication protocol used in the industrial automation sector. It was developed by Modicon (now Schneider Electric) in 1979 primarily for com
What is SCADA, Who Uses It and How It Works
What is SCADA, Who Uses It and How It Works
What is SCADA?
SCADA refers to a system that collects data from various sensors at a factory, plant, or in other remote locations and then sends this da
WHAT IS THE IEC61850 ?
What is the IEC61850 ?
IEC61850, especially used in electrical distribution systems, is a communication protocol. IEC61850 was developed to standardize and facilitate data exchange between components
OPC UA and MQTT in Industrial Communication: Integration in Brownfield Factories
OPC UA and MQTT: Definition and Fundamental Differences
In the context of industrial communication, OPC UA (Open Platform Communications Unified Architecture) and MQTT (Message Queuing Telemetry Tran
AFAD Disaster And Emergency Management Presidency Shelter & Command Center Automation
Mikrodev MP211 Series PLC products and ViewPLUS SCADA software were used in the Shelter and Command Center Automation. In the shelter system, alarm monitoring, energy monitoring and HVAC system contro
What is RTU and How Does It Work?
RTU stands for "Remote Terminal Unit" in English. Used in industrial automation systems, RTU is a type of hardware component used to increase the functionality of a device. These modules are used to e
Integration of Power Quality Data into SCADA: An IEC 61000-4-30-Focused Approach
If power quality is not visible, it cannot be managed. With SCADA integration, it is now possible to view Power Quality (PQ) data on a single screen, take rapid action during a fault, clarify maintena
What are the Differences Between PLC and RTU?
In the world of industrial automation, PLC (Programmable Logic Control) and RTU (Remote Terminal Unit) are two substantial devices. They are both used to automate and monitor process control, however,
What Is RTU Device?
What Is RTU Device?
RTUs (Remote Terminal Units) are important components used in industrial automation systems. These devices communicate with field devices (sensors, actuators, switches, etc.) and
Energy Management in Smart Cities
Living in an era where a significant portion of the global population resides in large cities and metropolises, these urban hubs are not only concentrations of people but also major contributors to hi
