Energy monitoring and control, catenary line monitoring and control and switch position information of more than 20 substations within Kayseray, a light rail public transportation system that started service in Kayseri, Türkiye. Mikrodev DCS products are transferred to ViewPLUS SCADA software over IEC 60870-5-104 communication protocol. In addition to monitoring and controlling the rail system via ViewPLUS SCADA software, instant or historical alarms and reports are made.
- LV and MV control and monitoring of more than 20 substations
- Data transmission over 70+ stations over IEC 60870-5-104 communication protocol
- More than 6000 data and alarm monitoring via ViewPLUS SCADA
- Control and monitoring of the entire catenary line
- Energy monitoring and control via compensation panels
- LV and MV switch position information and trip alarm monitoring
Other Post
All Posts
OPC UA and MQTT in Industrial Communication: Integration in Brownfield Factories
OPC UA and MQTT: Definition and Fundamental Differences
In the context of industrial communication, OPC UA (Open Platform Communications Unified Architecture) and MQTT (Message Queuing Telemetry Tran
Increasing Efficiency: Using MODBUS Gateway in PLC Programming
In the rapidly evolving landscape of industrial automation, the integration of Programmable Logic Controllers (PLCs) and communication protocols holds vital importance. The aim of this article is to p
Data Security in Industrial SCADA Systems: Best Practices for SCADA Security, Industrial Cybersecurity, and Penetration Testing
SCADA systems—at the heart of industrial automation—ensure the management of production lines and the continuity of processes. While these systems supervise critical sectors such as energy, water, gas
What are the advantages of meter reading with MDC OSOS Server?
MDC OSOS Server: An Innovative Solution for Modern Electricity Meter Data Management
Introduction
The automated collection and management of electricity consumption data is a critical need in modern
RTU vs. PLC: Fundamental Comparison in Terms of Differences, Usage Areas, and Control Systems
Success in the field of automation begins with choosing the right control system. RTU (Remote Terminal Unit) and PLC (Programmable Logic Controller) are two fundamental devices used to safely manage c
Alarm Management ISA-18.2: SCADA Alarms, Event Management, Priority, and Operator Effectiveness
Imagine 3,000 alarms sounding in one shift. The operator tries to pick out the real danger within the noise, stress increases, and errors multiply. A critical pump stops a few minutes later, and the c
Real-Time Visibility in Distribution Networks: Reducing Loss and Theft with Energy SCADA
In the evening hours, voltage drops on a feeder, lights flicker on some streets, the field team says “the transformer is overloaded,” but no one at the control center can speak clearly. This picture i
What is the MQTT?
What is the MQTT Communication Protocol?
The rapid proliferation of Internet of Things (IoT) and other similar distributed systems has increased the importance of data communication. The requirements
IEC 61131-3 Programming and Its Relation to the PLC Devices
IEC 61131-3 Programming and Its Relation to the PLC Devices
IEC 61131-3 Programming is a coding language used for programming standards for PLC devices. In this programming, there are function blocks
What are the Differences Between PLC and RTU?
In the world of industrial automation, PLC (Programmable Logic Control) and RTU (Remote Terminal Unit) are two substantial devices. They are both used to automate and monitor process control, however,
