Mikrodev PLC and Remote I/O products were used in the Pivot Arm Irrigation, Fertilization and Seed Dressing SCADA System at more than 90 points in Konya – Türkiye region. Agricultural irrigation area of 40000 decares is controlled by more than 180 PLC and Remote I/O devices.
- Over 180 Units Mikrodev PLC’s and Remote I/O’s
- Over 5000 data control via ViewPLUS SCADA
- Irrigation, fertilizing and seed dressing control with 91 stations over 40.000 decar field
- Adjusting the rotation speed and direction of the irrigation blades
- Adjusting the water pressure in the irrigation blades
- Adjusting the amount of water
- Monitoring of fertilizer amount
- Minimizing interference
- Real-time detection of risks and malfunctions
- Adjustment of the system and ensuring functionality in case of failure
- Protection of production and investment
- Reducing damage and costs caused by outages
- Optimized the operation and recovered from failure
Other Post
All Posts
Comparison of MODBUS and IEC 60870-5-104 Communication Protocols
MODBUS and IEC 60870-5-104 are two different communication protocols widely used in industrial automation and control systems. They have different features and are used for different purposes. There a
What Is Modbus?
What Is Modbus and What Is It Used For?
Modbus is a communication protocol used in the industrial automation sector. It was developed by Modicon (now Schneider Electric) in 1979 primarily for com
Republic of Türkiye General Directorate of State Hydraulic Works Flow Observation Station
Mikrodev PLC products were preferred in more than 30 stations in the Flow Observation Station project of the General Directorate of State Hydraulic Works.
- MP211EGL PLC products were used in the f
Turkcell Telecommunication Istanbul Seabus (IDO) – Ferry Rotary Antenna Automation System
In the system, which aims to prevent Turkcell network disconnections in sea buses, the axis control of the base station is carried out according to the sea bus GPS coordinate information.
4 MP211
IEC 61850, IEC 60870, and DNP3: Strategic Protocol Selection and Architecture in Substation SCADA Projects
As modern energy grids evolve from one-way power flow to two-way, dynamic, and smart grid structures, the backbone of this transformation is formed by communication protocols. In a Substation Automati
What are Industrial Automation Products?
What are Industrial Automation Products?
Industrial automation involves using control systems, computers, and robots to automate an enterprise's production processes; and industrial automation produc
What is a Distributed Control System (DCS)?
Distributed Control System (DCS) is an automation system and is used to control a manufacturing facility or an industrial process. These systems work in connection with each other by communicating man
Republic of Türkiye General Directore of Agricultural Enterprises (TIGEM) Pivot Arm Irrigation, Fertilizing & Seed Dressing SCADA System
Mikrodev PLC and Remote I/O products were used in the Pivot Arm Irrigation, Fertilization and Seed Dressing SCADA System at more than 90 points in Konya - Türkiye region. Agricultural irrigation area
AFAD Disaster And Emergency Management Presidency Shelter & Command Center Automation
Mikrodev MP211 Series PLC products and ViewPLUS SCADA software were used in the Shelter and Command Center Automation. In the shelter system, alarm monitoring, energy monitoring and HVAC system contro
RTU or PLC? A Guide to Making the Right Choice in Water and Energy Projects
When you go out to the field, the picture is usually the same: distributed stations, pumping stations, reservoirs, substation yards, and at every point the same question arises: “What should we use to
