Drinking water controls of 350 stations throughout Mugla province in Türkiye are made through Mikrodev RTU products and ViewPLUS SCADA software. In the system, well and tank operation/failure conditions, pump and valve controls, as well as flow and tank levels are monitored. With ViewPLUS SCADA software, level information can be observed instantly with live trends, and historical reports can be obtained.
- Over 350 stations
- Over 500 units Mikrodev RTU and expantion modüle
- Over 10000 data control via ViewPLUS SCADA
- Setup communication between Mikrodev RTU’s-wells-lifted pumps-tanks (via Modbus TCP Master- Slave)
- Remote monitoring and control of wells,lifted pumps and tanks via ViewPLUS SCADA
- Automatic control of wells and lift pumps according to tank level
- Data transmission to Viewplus SCADA via IEC 60870-5-104 protocol
- Hot stand by redundant SCADA
- Control and monitoring systems over operator panel (HMI) for local users
- Logging via Mikrodev RTU with IEC 60870-5-104 and auto sending logs to SCADA
- Alarm monitoring, alarm verification, alarm acknowledgment and adding acknowledge notes
- Monitoring of the energy analyzer
- Monitoring chlorine devices via ViewPLUS SCADA over Modbus TCP
- Monitoring flowmeters’ instantaneous and total flow values
- Controlling pressure safety of well-lift pumps
- Time and event-based reporting
- Tabular and graphical reporting
- Reporting filters
- Statistical reporting
- Compare data on different timescales on reports
Other Post
All Posts
Modbus Protocol and All Its Features
What is MODBUS Protocol and Its Features?
Modbus protocol is a serial communication protocol used to communicate between devices in industrial automation systems. Below you can find information about
TEI TUSAS Energy Management SCADA System
In the energy management system, more than 50000 energy data are monitored and controlled over ViewPLUS SCADA software by using Mikrodev DCS and IoT protocol gateway products at more than 100 stations
Motion Control with PLC & the Real Applications via Microdev PLC Devices
Programmable Logic Controllers (PLCs) are widely used in the industrial automation industry to control and monitor various processes. One of the main functions of PLCs is motion control, which involve
İstanbul Metropolitan Municipality Smart City SCADA System
Smart city system control is carried out within the body of İstanbul Metropolitan Municipality Energy Management and Lighting Directorate. Energy monitoring and efficiency calculations, as well as el
Republic of Türkiye Malatya İnönü University Infrastructure Control and Automation System
Mikrodev RTU300 series remote terminal unit and ViewPLUS SCADA software were preferred in Malatya İnönü University SCADA Automation System. Many different systems such as Water, Energy, Building HVAC
MODBUS TCP Protocols and Applications in Mikrodev PLC Devices
In previous blog titled “What is PLC Programming?”, MODBUS PROTOCOL Blocks and MODBUS RTU MODBUS Master and MODBUS RTU Slave connection and programming in Mikrodev MP110 and MP211 PLC Series devices a
Republic of Türkiye Ministry of Environment, Urbanization and Climate Change Continuous Wastewater Tracking System
Mikrodev products were preferred at more than 100 stations in the Continuous Wastewater Monitoring System managed by the Republic of Türkiye Ministry of Environment, Urbanization and Climate Change.
TUBITAK MAM(Marmara Research Center) MARTEK Building Automation & SCADA System
Building automation and SCADA system controls throughout TUBITAK Marmara Research Center MARTEK are made with Mikrodev products and software. Air conditioning, lighting and energy controls of the buil
WHAT IS THE IEC61850 ?
What is the IEC61850 ?
IEC61850, especially used in electrical distribution systems, is a communication protocol. IEC61850 was developed to standardize and facilitate data exchange between components
Israel Cellcom Telecommunication Base Stations Monitoring System
Mikrodev products were used at over 200 stations in the Israel Cellcom Telecommunication Base Stations Monitoring System. In the system, energy monitoring of base stations is carried out, and station
