Mikrodev products were preferred at more than 100 stations in the Continuous Wastewater Monitoring System managed by the Republic of Türkiye Ministry of Environment, Urbanization and Climate Change.
With our products, automation needs such as sampling, filtration, etc. are met according to the waste water online measurement parameters, while instant data is sent to the monitoring system of the ministry. In this way, unwanted chemical wastes in waste water channels are detected immediately and necessary interventions are made.
Other Post
All Posts
IEC 62443 and PLC & SCADA Security: A Step-by-Step Guide (OT Security)
Risks in Operational Technology (OT) are growing, and errors are turning into downtime and costs. IEC 62443 is a family of role- and process-oriented standards recognized as the reference for cybersec
Republic of Türkiye Malatya İnönü University Infrastructure Control and Automation System
Mikrodev RTU300 series remote terminal unit and ViewPLUS SCADA software were preferred in Malatya İnönü University SCADA Automation System. Many different systems such as Water, Energy, Building HVAC
Tekirdag City Water and Sewerage Administration (TESKI) Water Distribution SCADA System
Mikrodev RTU300 series remote terminal unit products are used at more than 350 stations in the drinking water distribution system in Tekirdag, Türkiye. The data at each point is sent to the central SC
Modbus Protocol and All Its Features
What is MODBUS Protocol and Its Features?
Modbus protocol is a serial communication protocol used to communicate between devices in industrial automation systems. Below you can find information about
WHAT IS THE IEC61850 ?
What is the IEC61850 ?
IEC61850, especially used in electrical distribution systems, is a communication protocol. IEC61850 was developed to standardize and facilitate data exchange between components
İstanbul Metropolitan Municipality Smart City SCADA System
Smart city system control is carried out within the body of İstanbul Metropolitan Municipality Energy Management and Lighting Directorate. Energy monitoring and efficiency calculations, as well as el
Comparison of MODBUS and IEC 60870-5-104 Communication Protocols
MODBUS and IEC 60870-5-104 are two different communication protocols widely used in industrial automation and control systems. They have different features and are used for different purposes. There a
What is a Distributed Control System (DCS)?
Distributed Control System (DCS) is an automation system and is used to control a manufacturing facility or an industrial process. These systems work in connection with each other by communicating man
What Is a Remote Terminal Unit (RTU)? Its Fundamental Role in Field Automation
Imagine a water reservoir located outside the city. The water level inside drops rapidly at midnight, the pump needs to start, but there is no one on site. If it takes hours for a technician to arrive
AFAD Disaster and Emergency Management Presidency Shelter Control System & Command Center Automation
Mikrodev MP211 Series PLC products and ViewPLUS SCADA software were used in the Shelter Control System and Command Center Automation project carried out for AFAD Disaster and Emergency Management Pres
