Mikrodev PLC products were preferred in more than 30 stations in the Flow Observation Station project of the General Directorate of State Hydraulic Works.
– MP211EGL PLC products were used in the flow measurement of the water carried over the dams at 30 different points in the agricultural irrigation system.
– Flow rate measurement information is sent to the State Hydraulic Works portal in Ankara via GPRS with MP211EGL PLC.
– The energy requirement at the current observation stations is provided through solar panels.
– With the LCD screen on the PLC, the flow rate information can be observed instantly and parameter adjustments can be made.
Other Post
All Posts
What Is RTU Device?
What Is RTU Device?
RTUs (Remote Terminal Units) are important components used in industrial automation systems. These devices communicate with field devices (sensors, actuators, switches, etc.) and
Redundancy Design: Seamless Operation with Dual SCADA Servers, Dual RTUs, and Dual SIM
An outage can start as ordinarily as a single relay falling silent in the field. Then alarms rain down, data flow stops, and decision-making is delayed. In sectors like energy, water, wastewater, oil
The Role of SCADA in Energy Management Solutions and Innovative Approaches (Renewable Energy Integration, Automation, and SCADA Solutions)
Energy management is becoming increasingly prominent for businesses and infrastructures in terms of sustainability and cost control with each passing day. SCADA solutions have completely changed proce
Industrial Scalability in MQTT with Sparkplug B: The Right Topology and Automatic Discovery
The number of devices in the IIoT field is increasing rapidly. The free structure of MQTT is flexible, but in large facilities, this freedom can turn into disorder. This is where MQTT Sparkplug B come
RTU or PLC? A Guide to Making the Right Choice in Water and Energy Projects
When you go out to the field, the picture is usually the same: distributed stations, pumping stations, reservoirs, substation yards, and at every point the same question arises: “What should we use to
What is the MQTT?
What is the MQTT Communication Protocol?
The rapid proliferation of Internet of Things (IoT) and other similar distributed systems has increased the importance of data communication. The requirements
What Is Modbus?
What Is Modbus and What Is It Used For?
Modbus is a communication protocol used in the industrial automation sector. It was developed by Modicon (now Schneider Electric) in 1979 primarily for com
ANKAMALL Building & Mall Automation System
Mikrodev MP211 Series PLC products and ViewPLUS SCADA software were used in ANKAMALL Building & Mall Automation System. Alarm monitoring, energy monitoring and system control of 278000 m2 area and
İstanbul Metropolitan Municipality Smart City SCADA System
Smart city system control is carried out within the body of İstanbul Metropolitan Municipality Energy Management and Lighting Directorate. Energy monitoring and efficiency calculations, as well as el
Integration of Power Quality Data into SCADA: An IEC 61000-4-30-Focused Approach
If power quality is not visible, it cannot be managed. With SCADA integration, it is now possible to view Power Quality (PQ) data on a single screen, take rapid action during a fault, clarify maintena
