Mikrodev PLC products were preferred in more than 30 stations in the Flow Observation Station project of the General Directorate of State Hydraulic Works.
– MP211EGL PLC products were used in the flow measurement of the water carried over the dams at 30 different points in the agricultural irrigation system.
– Flow rate measurement information is sent to the State Hydraulic Works portal in Ankara via GPRS with MP211EGL PLC.
– The energy requirement at the current observation stations is provided through solar panels.
– With the LCD screen on the PLC, the flow rate information can be observed instantly and parameter adjustments can be made.
Other Post
All Posts
Industrial Scalability in MQTT with Sparkplug B: The Right Topology and Automatic Discovery
The number of devices in the IIoT field is increasing rapidly. The free structure of MQTT is flexible, but in large facilities, this freedom can turn into disorder. This is where MQTT Sparkplug B come
Data Security in Industrial SCADA Systems: Best Practices for SCADA Security, Industrial Cybersecurity, and Penetration Testing
SCADA systems—at the heart of industrial automation—ensure the management of production lines and the continuity of processes. While these systems supervise critical sectors such as energy, water, gas
Republic of Türkiye Ministry of Environment, Urbanization and Climate Change Continuous Wastewater Tracking System
Mikrodev products were preferred at more than 100 stations in the Continuous Wastewater Monitoring System managed by the Republic of Türkiye Ministry of Environment, Urbanization and Climate Change.
Redundancy Design: Seamless Operation with Dual SCADA Servers, Dual RTUs, and Dual SIM
An outage can start as ordinarily as a single relay falling silent in the field. Then alarms rain down, data flow stops, and decision-making is delayed. In sectors like energy, water, wastewater, oil
SCL (CID, SED, ICD) Engineering in Substation Automation: From File to Commissioning
In a substation automation project, everything seems to start with cables and panels. But the moment you open your first packet capture file in the field, you see the reality: the backbone that carrie
Digital Transformation in Transformer Substations: SCADA and Substation Automation
Energy is the lifeblood of modern civilization. In the process of delivering this energy from generation to the end consumer in an uninterrupted, high-quality, and secure manner, the most critical nod
What is IEC 60870-5-104 and why is it used in power system automation?
IEC 60870-5-104 is a communication standard used for remote monitoring and control in electrical power systems. Since it is designed for telecontrol and telemetry, it is very common in substations, es
Bursa Inegol OIZ 34.5 KV Medium Voltage Power Distribution Network SCADA System
Mikrodev products were used in energy monitoring and controls throughout the Inegol Organized Industrial Zone in Bursa, Türkiye. Cutter position information, controls and fault tracking are done throu
National Bank of Saudi Arabia ATM Control Automation
Mikrodev MP211 series PLC products were used in the ATM Control Automation project of the National Bank of Saudi Arabia. At more than 80 stations, the operating status of the ATM cabinet, cabin securi
TEI TUSAS Energy Management SCADA System
In the energy management system, more than 50000 energy data are monitored and controlled over ViewPLUS SCADA software by using Mikrodev DCS and IoT protocol gateway products at more than 100 stations
