Mikrodev RTU300 series remote terminal unit and ViewPLUS SCADA software were preferred in Malatya İnönü University SCADA Automation System. Many different systems such as Water, Energy, Building HVAC were combined on a single SCADA software. In this respect, it has become an exemplary project focused on energy and operational efficiency in every field.
- More than 20 stations, Mikrodev RTU300 series remote terminal unit
- Over 2000 data controls via ViewPLUS SCADA
- Data transmission to ViewPLUS SCADA over MODBUS and IEC60870-5-104 communication protocols
- Report and alarm tracking without data loss
- Tank level monitoring
- Co-aging pump control
- Building air conditioning, HVAC automation control within the campus
- Campus-wide energy tracking system
- Meter reading systems
Other Post
All Posts
Republic of Türkiye General Directorate of State Hydraulic Works Flow Observation Station
Mikrodev PLC products were preferred in more than 30 stations in the Flow Observation Station project of the General Directorate of State Hydraulic Works.
- MP211EGL PLC products were used in the f
Trabzon City Water and Sewerage Administration (TİSKİ) Water SCADA System
RTU and PLC products installed in more than 200 wells, warehouses and pumping centers throughout Trabzon are managed through the ViewPlus SCADA software in the TİSKİ Control Center.
Over 200 well
What is Data Management in PLC and the Advantages of Using Data Management ?
In the realm of industrial automation, Programmable Logic Controllers (PLCs) stand out as crucial automatic control devices, frequently employed in industrial sectors. As we emphasized in our blog pos
What is a Distributed Control System (DCS)?
Distributed Control System (DCS) is an automation system and is used to control a manufacturing facility or an industrial process. These systems work in connection with each other by communicating man
PTP (IEEE 1588) vs NTP: Millisecond Precision Time Synchronization in Industrial Networks and SCADA
How accurate is time alignment in industrial systems? Time synchronization means reliable data and accurate decisions in the field. An incorrect clock creates large gaps in fault analysis and quality
ANKAMALL Building & Mall Automation System
Mikrodev MP211 Series PLC products and ViewPLUS SCADA software were used in ANKAMALL Building & Mall Automation System. Alarm monitoring, energy monitoring and system control of 278000 m2 area and
RTU vs. PLC: Fundamental Comparison in Terms of Differences, Usage Areas, and Control Systems
Success in the field of automation begins with choosing the right control system. RTU (Remote Terminal Unit) and PLC (Programmable Logic Controller) are two fundamental devices used to safely manage c
What Is RTU Device?
What Is RTU Device?
RTUs (Remote Terminal Units) are important components used in industrial automation systems. These devices communicate with field devices (sensors, actuators, switches, etc.) and
Bursa Inegol OIZ 34.5 KV Medium Voltage Power Distribution Network SCADA System
Mikrodev products were used in energy monitoring and controls throughout the Inegol Organized Industrial Zone in Bursa, Türkiye. Cutter position information, controls and fault tracking are done throu
What is Programmable Logic Controller Systems (PLC)?
What is Programmable Logic Controller Systems (PLC)?
A PLC is an electronic device used to perform sequencing, timing, speed and motion controls in industrial systems. These devices allow for logica
